|
In addition to our Specialty EDFA systems,Calmar Optcom is now offering high power erbium-doped fiber amplifiers (AMP-ST) in response to industrial and R & D applications.
AMP-ST can provide up to 37 dBm saturated optical power. It has RS232 and GPIB communication interfaces. The control panel
includes pump laser current control, optical output power control,and automatic gain control. AMP-ST is robust, and is easy to configure and operate.
AMP-ST is an ideal tool for applications where very high power is required. With its wide range of amplifiers, Calmar can customize solutions that closely fit your test requirements.
Features:
-
Nominal gain 25 -35 dB
-
Saturated output power up to 37 dBm
-
Wavelength range 1530 -1565 nm
-
Input power range from -25 to 10 dBm
-
Low noise figures
-
Easy configuration and operation
-
Long term stability
AMP-LD Specification:
|
Model
Number |
AMP-ST-27 |
AMP-ST-30 |
AMP-ST-33 |
AMP-ST-37 |
|
Saturated Output Power (dBm) |
27 |
30 |
33 |
37 |
|
Input Power Range (dBm) |
-3 ~ 3 |
-3 ~ 3 |
0 ~ 3 |
0 ~ 3 |
|
Wavelength (nm) |
1535 ~ 1565 |
1530 - 1565 |
1535 ~ 1565 |
1540 ~1570 |
|
Typical Noise Figure (dB) |
5.5 |
5.5 |
6.0 |
6.0 |
|
Operating Voltage (V) |
85 - 264 AC |
|
Dimension (cm) |
|
|
Input/output Termination |
SMF-28 fiber with FC/APC connectors (or customized) |
| 
