|
The HCT-7000 is a portable, battery powered communication tester, designed for a wide range of protocol analysis and BERT (Bit Error Rate Test) at full E1 speeds(2.048Mbps) and is fully suitable for equipment installations, on-line or off-line diagnostics, debugging,and interface development.
The HCT-7000 features a backlit Liquid Crystal Display (LCD), push-button switch keyboard, interface lead indicator LEDs, PCMCIA card slot, user replaceable data port interface modules and internal rechargeable Li-Ion battery. The unit includes the Basic Interfaces, basic operational firmware, comprehensive User Guide, universal AC power adapter (100~240 VAC) and a sturdy hard shell carry case.
General Specifications:
- Interface Modules ( Dual Port )
Datacom Interface Module: RS-232C/D (V.24), RS-449 (V.36),
RS-530, X.21, V.35.
E1 Interface Module: G.703 E1 (2048K).
*T1 Interface Module: G.703 T1 (1544K).
*G.703 64K Co-directional Module
others to be announced
- Basic Interfaces: Centronics Printer Port Craft control Serial port.
- Protocols: Async, Sync (BSC), HDLC,
SDLC, X.25, Frame Relay, SS#7,
PPP (Sync.), V5.1, V5.2, ISDN-D,
*DDCMP, *SNA, *SLIP.
- Data Rate: ASYNC/SYNC:150-2.048Mbps
- Data Code: ASCII, EBCDIC, HEX, IPARS,
TRANSCODE, EBCD
- Data Length: ASYNC Mode: 5,6,7, or 8 bits
SYNC Mode: 8 bits
- Parity Bit: ASYNC Mode: None, Odd,
Even, Mark, Space.
- Stop Bits: ASYNC Mode: 1, 2
- Display Modes: Data only: Full Duplex
Data only: Half Duplex
Data and Lead Status
Frame and Packet.
- Error Check: None, Parity, LRC, CRC-16,
CRC-CCITT.
Please check PDF document for more details.
|
