The Agilent 8714ET features a built-in transmission/reflection test set with a full range of magnitude and phase measurements. Two independent channels can measure and display two device parameters, such as transmission and reflection response, in a variety of formats including complex impedance, SWR, and delay, on rectangular, polar or Smith-chart displays. These analyzers also employ advanced vector-error-correction techniques to enhance measurement accuracy.

    For a wider range of output power levels to test active devices and components, Option 1E1 adds a 60-dB step attenuator as a standard feature, which extends the lowest power-level setting to -60 dBm. Both 50-ohm and 75-ohm versions are available.

Features:

• Narrowband and broadband detection
• 100 dB dynamic range
• Real-time sweep speeds (40 ms/sweep)
• Integrated T/R test set
• Synthesized source with 1-Hz resolution
• Standard LAN interface
• Standard Internal Agilent Instrument BASIC (IBASIC)
• Standard 2, 6, and 12-port switching test sets available
• Optional fault-location and SRL measurements